Arch Base Pixel Paradise
Leaping Arch LED Pixel
Leaping Arch LED Strip
Arch Base Pixel Paradise
Arch Base Pixel Paradise
Arch Base Pixel Paradise
arch kit small
Leaping Arch LED Pixel
leapingarch1
Leaping Arch LED Strip
Arch Base Pixel Paradise
Pixel Paradise Bungee Strip Clips
Arch Base Pixel Paradise

Leaping Arch Base Kit

5.00 out of 5
2 customer reviews|Add a review

$15.00 – $16.00

Our most popular product, redesigned and molded for unmatched strength and functionality. These new arch bases are injection-molded to perfection, allowing you to easily line-up several arches end-to-end. Interlocking notches to assure proper alignment form arch to arch! Neck features a 5 degree angle to help assist with assembly (Our original 3D printed bases featured a 10 degree angle, so they are NOT the same).

Each kit comes with 2x arch bases, 2x strip clips, 4″ zip ties, and 3/4″ self-tapping screws. 2x bungee balls are included in the Deluxe kit, for only $1 more. They can also be purchased separately here. Two bungees are needed for each arch set.

1″ PEX tubing and 2″ Outer Diameter HDPE tubing can be used with this design, and can be purchased in 10′ straight lengths here.

1/2″ EMT is purchased at your local hardware store and used to connect each base end-to-end. *Use a self-tapping screw to secure 1/2″ EMT conduit to each base before connecting your arch tubing.

It is recommended to use a common 10″ spike nail to secure to ground, and add further support by using 24″ rebar and zip tie rebar to a section of your tubing.

Works great with our custom length 2.5 M (8’6″) or 3 M (10′) LED strips!

*Price is Per Pair

Allow 2-4 business days for delivery

Installation instructions can be found HERE

Category:
Clear
  Ask a Question

Additional information

Weight .4 lbs
Dimensions 4 × 3 × 3 in
Kit Options

Without Bungees, With Bungees

2 reviews for Leaping Arch Base Kit

  1. 5 out of 5

    Dwight viator (verified owner) –

    This kit is amazing and super easy to build arches. they give you instructions and tell you all the required dimensions for EMT and PEX or HDPE tubing. i had 4 arches built in about 30 mins!! the best part about this kit is the customer service which they go above and beyond! updates and communication were awesome!

  2. 5 out of 5

    d.al.manda (verified owner) –

    Solid and couldn’t be any easier to build. Customer service is top shelf too. Highly recommend product and vendor.

Only logged in customers who have purchased this product may leave a review.

General Inquiries

1 Inquiries

  1. September 8, 2022

    Hello I’m interested in your Leaping Arch Base Kit. What is the degree angle the pex tubing will sit in the base? 89 degree? Do you offer a double set where these fit 2 bases together?

    Thx.     –

    Hello Aaron,

    Tabks for your inquiry. The angle of the arches is actually 80°. After extensive testing, we found this angle to be the perfect trade-off between a nice leaping appearance, and having adequate structural strength to withstand the initial assembly of 2\\\" HDPE (the 1\\\" pex doesn\\\'t really put as much strain on the bases while bending).

     Regarding the \\\"double base\\\" idea - DON\\\'T DO IT! Seems like a novel concept, however you\\\'ll soon realize that rather than having individual arches that can\\\'t be stored easily and setup quickly each year, the double base arches require disassembling the pex from the base each year to tear down. That\\\'s a HUGE pain in the ass, but more importantly, it puts added stress on the internal LED strip tugging on it each season. LED strips are awesome but they are quite fragile and really don\\\'t like to be moved around.

    The great news is, our leaping arch bases lock into place with the other so you have proper alignment from arch to arch, but can easily setup and take down each arch each year. 

    Hope this answers your questions!

    Dave Mills

You may also like…