YETI Steel Mega Tree Topper


  1. Introducing our patent-pending YETI™️ steel mega tree toppers – exclusively from Pixel Paradise USA!

We pushed the limits of plasma cutting to give you perfectly precise cutouts for your mega tree strips, for the best looking topper on the market!

  • No need for J hooks – saving you time and money!
  • No other topper gives you a more “tight and clean” look.
  • Designed to be mounted with a threaded “floor flange” and threaded pipe from your local hardware store or a ratcheting “ASAP” pole
  • Currently available in two different sizes; the YETI 32 (8.75″) and YETI 48 (12.5″) – Black or Green color

Allow 3-5 business days for delivery.

Installation instructions can be found HERE




Cold-Rolled Steel

Flange Mount

Sizes 1/2″ – 2″ diameter


2 years

Additional information

Weight N/A
Dimensions N/A

Yeti 32 Black, Yeti 32 Green, Yeti 48 Black, Yeti 48 Green


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

General Inquiries

1 Inquiries

  1. December 16, 2022

    What size is the center hole. I need to slide it over 1-1/4\" black pipe. For my 20\' mega tree.

    Our YETI 48 works great on a 1.25\\\" galvanized pipe. The mounting crosshairs can support .5\\\"-2.5\\\" pipe. We use a 1.5\\\" galvanized outer pipe with a 1\\\" inner for our 20\\\' asap mega tree. The center hole cutout is not important, since the YETI toppers are design to be fixed to the center pole using a threaded floor flange, and any combination of reducers/nipples of galvanized pipe. This works great for ASAP pole designs and static poles. The YETI topper is not designed to \\\"slip\\\" over solid pipe. To answer your question, the center hole is 1\\\" which will accommodate a 3/4\\\" pipe, but then you\\\'d need a pulley system at the top of your pole or a way to fix the topper without spinning. We recommend reducing the pipe size just before the topper since the star support pole above the topper is much easier to mount a star with 3/4\\\" pipe instead of 1.25\\\" pipe, and will save on hardware costs (flanges, nipples) and adds less weight. Hope this helps! Feel free to reach out with any other questions!