9 LED Pixel Puck Light with waterproof Mini xConnect Pigtail
9 LED Pixel Puck Light with waterproof Mini xConnect Pigtail
9 LED Pixel Puck Light with waterproof Mini xConnect Pigtail
9 LED Pixel Puck Light with waterproof Mini xConnect Pigtail
poster image

UPDATED 2024! 12V 9-LED RGB 35mm Puck Light Mini xConnect

4.00 out of 5
1 customer review|Add a review

$4.50

*UPDATED 2024 DESIGN with a mini-xConnect to full-sized xConnect piggy, to allow easy removal of collar, and requiring a smaller drill hole for your project.

12V 9-LED RGB 35mm “Puck” Light w/ removable xConnect Pigtail – Approximately 12″ long lead from puck to xConnect.

Each puck functions as a single pixel (all LED’s are controlled by a single chip, meaning all same color). Flat space-saving design. Waterproof cover, and epoxy-filled back. Threaded for easy mounting to any surface under 2″ thick.

White PCB – Perfect for creating custom 3D-printer props like RBL’s and Mega Mini Lights!

NOTE: These pucks use the UCS2903 chipset but are ws2811 compatible. In xLights they are each modeled as a single pixel flood light, and the default ws2811 xLights controller settings works (no need to adjust protocol type in xLights). A small issue arises if you mix bullet nodes with them. You can successfully add ws2811 bullets to the beginning of a strand of pucks, but adding bullets to the end of the strand will not illuminate the bullets

Availability: Out of stock Categories: ,
  Ask a Question

Description

Input Voltage

DC 12V

Max Current

50MA

Max Power

2.16W (Total)

Dimensions

35mm

Drill Hole Diameter

19mm wide x 40mm deep

Configuration

Each puck is one pixel (3 channels)
Puck works as a flood (all 9 LED’s same color)

Waterproof Protection

IP65

LED Count

9 LED

Pigtail

Mini xConnect – xConnect

PCB Color

White

Protocol

UCS2903

Warranty

2 Years

Certification

CE and RoHS

Additional information

Weight .12 lbs
Dimensions 2 × 2 × 1 in

1 review for UPDATED 2024! 12V 9-LED RGB 35mm Puck Light Mini xConnect

  1. 4 out of 5

    ybjr38 (verified owner) –

    these are a nice little product and great to replace ac lights in things like HD standing pumpkins to convert to RGB. Also have used them for Candy Cane Post that are three feet tall with globes to line a driveway. you have to work to get the lock nut off the connector is the only reason not the 5 stars. Still its just a minor inconvenience.

Only logged in customers who have purchased this product may leave a review.

General Inquiries

3 Inquiries

  1. October 13, 2023

    Do you happen to have Ray Wu connections for the puc lights? I can\'t seem to find it. –

    Hello Ryan,

    Unfortunately, we have moved all of our product over to a single connector, xConnect. We do however have \\\"exchangers\\\" that will allow your ray wu controller pigtails and extensions to connect to our pucks. You can find them here: https://pixelparadiseusa.com/product/xchanger/

  2. January 17, 2023

    Are these ws2811 or just rgb? –

    Hey Rob, these are technically SK16703P, but they work just like common ws2811. In fact, you can daisy chain these pucks off of a strand of ws2811 pixels and they work all the same. One thing to note, there\\\'s only a single controller in each puck, so they are programmed at only a single pixel in xLights. Actually makes it really easy to draw out on your layout. Love these things!

  3. July 20, 2022

    Are the lights \"ws2811\" ? –

    Ok, just trying to figure out why the last of the 10 in line will not act correctly. Like it is not sending the right number of channels. I am using Xlights . it may be a setting that I am overlooking. any ideas ?  I know all 3 colors work fine and it is not the lights itself. Just making sure that they are WS2811 protocol.  I could not find this on your website. (possibly add it to the website) 

    I will be ordering from you again, I like to spend $ local and keep people like you in business.  


    VR

    Mike